Jet Spud SS
$100.00
Description
The Jet Spud is one of the smallest and sweetest decks for an electric longboard not just because of it’s relative long wheel base which helps fitting a proper sized electronic box underneath but because the riding experience is unreal, those foot pockets are pretty wide so riding it feels stable and safe.
The enclosure features an integrated cover for the ESC wires so the finish of the final deck looks professional.
If you are looking for a short and light commute electric board, the Spud and it’s enclosure will be the perfect companion.
The enclosure has enough space to fit a 12S3P made out of 18650s cells a BMS for charging and dual ECSs. You could also get creative an fit a 10S4P. There is also a double stacked cells version on the works for a whooping 12S6P battery pack.
Important note:
The Jet Spud 29″ had originally two wheelbase positions one for shorter wheels base, one for longer, my enclosures have been designed to fit the longer wheelbase in order to make more room for electronics and batteries.
In the second half of 2018 a new batch of Jet Spuds 29″ decks came out, this deck didn’t have two wheelbase positions in the tail as all previouses batches, just one, the shorter one.
If you got this deck all you need to do is to drill new holes for the baseplate following the next step-by-step procedure:
- Install the front trucks but not the rear
- Position the enclosure right on the back of the front truck base plate
- Position the rear truck baseplate only (no hanger) right after the enclosure and secure it momentarily with double sided tape
- Drill 4 5mm holes with a 5mm drill bit using the baseplate as guide
- Remove the base plate and double sided tape and install the rear truck
- Enjoy your Spud enclosure
This procedure is easier than installing the enclosure holding bolts/inserts which can be found here
